12el (6H/6V) 50MHz X-POL MAP65 Yagi
Description
Prices 20% less for customers outside of EU
A 6 element Crossed (X-POL) LFA Yagi (12el total) for EME and MAP65 Applications
The G0KSC LFA Yagi is a major step forward in the development of the Yagi Antenna; it provides a low-noise front-end for your radio so you hear more weak signals. This compact 6el X-POL is just 6m long and provides both Vertical and Horizontal polarization. This Yagi has been designed to be used with K1JT's MAP 65 software and other EME applications and we have developed a matching non-conductive H-frame for use with it. This antenna can be used on its own, as a part of a stacked pair or as a box of 4, you and your available space can decide!
Performance
11.18dBi @ 50.150MHz
31.51dB @ 50.150MHz
Peak Gain: 11.22dBi
Peak F/B: 32.21dB
Power Rating: 5kw+
SWR: Below 1.2:1 from 50.00MHz to 50.500MHz
Stacking Distance: 4.5-5.4m ( 5.25m recommended)
Boom Length: 5.930m
Weight: 11.2Kg / 24.2LB
Turning Radius: 3.23m / 10.6ft
Wind Loading: 0.32 Square Metres / 3.5 Square feet
Wind Survival: 160KPH + /100MPH+
Other options available if higher wind loading/survival is required.
Specification
This antenna is made with 1/2 inch (12.7mm) center elements and 3/8 inch (9.525mm) outer elements. The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which will support 2 inch (50mm) masts. Boom is 1.5 inch square 16SWG aluminum.
Our antennas are constructed with the best quality materials in order the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, ensuring they work as well as our software model predicts.
Note: much development time has gone into our antennas, not just on basic electromagnetic design, we are able to model the effect of insulators, booms and other objects to ensure the make up of our antennas have least effect on performance and pattern degradation. More information can be found here
- Marine grade stainless steel fittings
- Original Stauff Insulation clamps
- Mill finished boom and elements for highest levels of accuracy
4 x antenna in H-Frame Azimuth Plot in one plane (swapped in reverse polarization)
4 x antenna in H frame Elevation Plot in one plane (swapped in reverse polarization)
SWR
Manufactured the right way, not the cheapest way!