7 element 144MHz LFA Yagi

7_element_144MHz_4d18c97467cbd.png
Manufacturer InnovAntennas

A 7 element wideband, low-noise LFA Yagi
Sales price £199.95
gross price
Sales price without tax £166.63
Sales price without tax£166.63
Tax amount £33.33
Total Tax: £33.33

Preloader

Prices 20% less for customers outside of EU

A Very Low Noise Yagi for serious DX and EME applications


The G0KSC LFA (Loop Fed Array) Yagi has quickly become 'the one to have'  if you are looking for serious weak signal work on the bottom of the 2m band. The LFA Yagi has been specifically designed to ensure the lowest levels of unwanted noise are received. The compliment of a tight, highly suppressed pattern and closed loop fed system ensure everything from rain static to man-made noise are heavily reduced.

The LFA loop along with the great pattern helps to reduce noise and ensure the very best user experience with the weakest signals being heard not lost in noise. Designed with the very latest modelling software packages costing 10's of thousands of pounds, not 30 year old software costing around $100.00 !! Accuracy in model and real-world performance assured.

The LFA is especially effective for EME where very low noise antennas are required and many hours development have been spent ensuring the highest levels of performance have been achieved in an antenna that is not affected by wet weather conditions. As a single, double and 4 stack system, the LFA Yagi is the one to have.

Our antennas are constructed with the best quality materials in order that the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, ensuring they work as well as our software model predicts.

  1. Marine grade Stainless Steel Fittings*
  2. Original Stauff insulator clamps
  3. Mill finished for highest levels of accuracy

If you are looking for the best of the best from both a performance and mechanical construction perspective then look no further, you have come to the right place!

 

Performance

Gain: 12.81dBi @ 144.100MHz

Gain: 12.83dBi @ 144.300MHz

F/B: 21.33dB  @ 144.100MHz

F/B: 21.73dB  @ 144.300MHz

Peak Gain: 12.89dBi

Gain 10m above ground: 18.66dBi

Peak F/B: 21.97dB

Power Rating: 3kw

SWR: Below 1.1:1 from 144.00MHz to 145.00MHz

Boom Length: 2.894m

Weight: 2.7Kg / 6LB

Turning Radius: 1.591m / 5.22ft

Wind Loading: 0.07 Square Metres / 0.71 Square feet

Wind Survival: 407KPH / 253MPH

Other options available if higher wind loading/survival is required.

 

Stacking Distance Vertically: 2.0-2.8m (best trade-off 2.40m)

Stacking Distance Horizontally: 2.4-2.85m (best trade-off 2.77m)

Following figures calculated at 144.300MHz

2 Stacked Vertically @ 2.4m Gain: 15.96dBi

2 Stacked Vertically @ 2.6m Gain: 16.12dBi

 

2 Stacked Vertically @2.4m F/B: 27.93dB

2 Stacked Vertically @2.6m F/B: 27.93dB

2 Stacked Horizontally @ 2.55m Gain: 15.62dBi

2 Stacked Horizontally @ 2.55m F/B: 22.82dB

2 Stacked Horizontally @ 2.75m Gain: 15.75dBi

2 Stacked Horizontally @ 2.75m F/B: 22.17dB

4 Antennas 2.55m V x 2.4m H Gain: 18.47dBi

4 Antennas 2.75m V x 2.6m H Gain: 18.64dBi

Sky Temperature: 255.0 Kelvin @ 144.100MHz

G/T Figure: -5.29dB @ 144.100MHz

 

Specification

This antenna has all parasitic elements made from  3/8 inch aluminum tube. The LFA loop is constructed from 4 pieces of aluminum tube. The sections in-line with the parasitic elements are 1/2 inch while the end sections of the loop are 3/8 inch allowing the user to adjust the loop for best SWR. All elements are fully insulated from the boom held in place by high quality UV resistant, RF neutral insulators which in-turn are held to the boom via Marine grade stainless steel fixings and fittings.

The boom is 1.25 inch square (31.75mm). No boom guy is needed with this antenna

If you want an antenna to last and perform in all weathers without SWR or bandwidth shifting, this is it!

 

Azimuth Plot

 

Elevation Plot

 

Single antenna 10m above average ground

 

SWR

 

Manufactured the right way, not the cheapest way!

* Where possible marine grade stainless steel components are used.


Copyright © 2024 Innovantennas. All Rights Reserved