A 6 element LFA-Q (Super-rigid Quad-style) Super-Light Quad Style Yagi for 144 - 145MHz
The LFA-Q Packs a bigger punch than a traditional Yagi with MUCH MORE GAIN per metre of boom
If it is GAIN you want from a small boom, this is the antenna for you! Wow, Super compact boom!! Massive 11.43dBi from this antenna!
Another impressive design from G0KSC, 'The Quad has been InnovAted!' A Quad-style antenna with full wave length loop elements which provide a number of benefits. First, if the elements are of reasonable thickness (as ours are, they are not wire!) then good bandwidth coverage can be achieved. Next, up to around 7 elements (1.5wl) much better gain per metre of boom can be achieved than would otherwise be possible from a traditional Yagi covering the same bandwidth. Finally, with the dual-boom structure and 1/2'' diameter elements, the LFA-Q is extremely rigid and can stand up to some serious weather conditions!
IDEAL PORTABLE OR SOTA USE!
Despite it's rigidity, the LFA-Q is extremely light weight and this means even in strong winds, snow and ice the LFA-Q will hold its own.
Our antennas are constructed with the best quality materials in order the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, this ensures they work as well as our software model predicts.
Simon Brown, G4ELI (author of Ham Radio Deluxe and SDR-Radio consule) sent us this photo of his 6el LFA-Q
For more information
Performance
Gain: 12.44dBi @ 144.3MHz
F/B: 23.56dB @ 144.3MHz
Peak Gain: 12.54dBi
Gain 15m above ground: 18.3dBi
Peak F/B: 25.21dB
Power Rating: 5kw
SWR: Below 1.2.1 from 144MHz to 145MHz
Boom Length: 2.33m
Loop Height: 25cms
Weight: 3.5kg/11.5lbs
Safe Wind Speed: 160Kph/100Mph
Turning Radius: 1.8m/6ft
Vertical Stacking: 2.5m
Customer comment on the LFA-Q:
''Very nice...assembled and installed over the last two days - even though it arrived over night!
Performs extremely well - It replaced a MET 144 8T (remember them) that was about 20 years old - the gamma match had become unstable - suspect the trombone dielectric has aged/decayed.
This antenna has great FB like the MET but I think gain is very comparable and bandwidth far, far superior.
Thanks for the great service
Martin VE7MM/G4EZG''
Specification
This antenna is made with a 1/2 inch (12.7mm) and 3/8 inch (9.525mm) diameter tube for the LFA-Q and the boom sections are 3/4'' 19mm diameter. This antenna is not made cheaply, it is made to perform and to do so for many years with Marine Grade Stainless Steel fixings.
No figures are made up here as they are in some Ham Radio adverts, all performance figures are verified in the very latest software simulation packages with some antennas being professionally confirmed on an antenna range.
Azimuth Plot
Elevation Plot 10m above ground
SWR
Manufactured the right way, not the cheapest way!
* Where possible marine grade stainless steel components are used.