COMPACT VERSION OF THIS ANTENNA XR6C with CAPACITY LOADED 20M ELEMENTS ONLY 8.8M / 29' WIDE! see HERE
The XR6 MkII - The InnovAntennas XR6 - An 11 element multi-band HF & 6m Super-compact Yagi covering 20m/17m/15m/12m/10m/6m bands with a single feed point.
Unique in the Market
The XR6 has been given the 6m band in addition to the traditional 5 HF bands of 20/17/15/12/10 to match today's HF rigs and give excellent performance on all bands. with a boom of just 3.5m and weighing under 30 Kilos, this antenna has created its own place in the 'full size' HF Beam market.
Unlimited Power Handling
The XR6 has no matching devices, no traps, no coils, no hairpins so nothing to lose valueable power and thus, nothing to over-heat through these inefficient devices. This means the only power limitation you have is how much power your coax cable can handle.
The Ideal partner for SDR Radios
The XR6 is an ideal partner for today's top SDR radios. There is no limitation in how many bands you can monitor or use at once. This means with products such as the Flex 6700, all 6 bands can be monitored at the same time WITHOUT COMPROMISE.
The XR6 MKII has been in development for the last 12 months improving bandwidth and gain to ensure more of each band than ever before can be used without the requirement of an ATU.
Multi-band, Performance-Busting Design
The more bands there are added to a multi-band Yagi, the more interlaced elements there are and in turn, performance per band drops with each no band added. The Unique design of the XR6 MkII means no more thna 3 band are interlaced on any part of the boom.
We have modified the construction of the XR6 to provide a more rigid look with faster taper to ensure fatigue due to vortex shedding (constant wind flow causing vibration) are not an issue. 20m element start at 35mm diameter and boom is 50mm diameter.
Excellent All-Weather handling and reliability
With no moving parts and being modelled for wide bandwidth per band, the XR6 MkII is very forgiving in all weathers allowing you to enjoy your hobby whatever the location or time of year.
Icom North America and Kenwood UK changed their HF antennas to 'XR's' to ensure reliability and remove the need for maintenance. If you don't want to be climbing the tower each year to fix stuff, the XR6 MkII is for you.
The Right Materials for the Job
The XR6 standing on it's own in terms of quality. built using the latest CNC technology, all components are at the top of their field too. Our insulators are UV protected and handle -170 to +240 degrees C, our hardware is Marine Grade Stainless Steel and our aluminium aerospace grade T6 6066/6082.
An XR6 below a Delta C-140 Rotating 40m dipole @ OE7MPI
Weight: 34 kilos
Turning Radius: 16' / 4.84m
Boom Length: 11'8'' / 3.5m
Projected area: 12.56 SqFt /1.167SqMtr
Wind Survival: 107Mph / 172Kph
Average Gain per band @ 20m above average ground: 11.24dBi
The new XR6 MkII being tested at our factory
Close-up of the feed arrangement on the XR6 MkII with straight, parrallel lines
The XR6 MkII side view showing the short (3.5m) boom
View of the 50mm (2") Sqaure boom and element holders on the rear of the antenna
XR6 Mk1 version, installed at 9J2MM
A European version of the XR6C (Compact) installed at GI0TSS (MKII with capacity loading, not yet available)
Power Rating: 10Kw
Boom Length: 3.5 Metres
Turning Radius: 5.99 Metres
Wind Loading: 1.21 Square Metres
Wind Survival: up to 200KPH+ / 115MPH+
Contact us to discuss your system/station requirements for a FREE CONSULTATION!