11 element 70MHz LFA Yagi

11_element_70MHz_4d83bd71bbdc6.png
Manufacturer InnovAntennas

A 11 element low-noise 70MHz LFA Yagi
Sales price £509.96
gross price
Tax amount £99.99
Total Tax: £99.99

Preloader

Prices 20% less for customers outside of EU

A Super High Gain 70MHz LFA Yagi optimised for DX applications

The G0KSC LFA Yagi is a major step forward in the development of the Yagi Antenna; it provides a low-noise front-end for your radio so you hear more weak signals. If you suffer with noise or are in a city location, this is the antenna for you. This 11 element 70Mhz LFA provides stunning performance across the whole 4m band (69.950 - 70.700MHz). Hard to beat with a direct 50 Ohm feed-point and no matching losses !!

This is an excellent stacker requiring just 6.5m spacing. See details below.

 

Performance

Gain:15.44dBi @ 70.200MHz

Gain at 10m above ground: 20.90dBi

F/B: 29.76dB @ 70.200MHz

Peak Gain: 15.56dBi

Peak F/B: 31.11dB

Power Rating: 5kw

SWR: Below 1.1.1 from 69.950MHz to 70.700MHz

Boom Length: 13.739m

Stacking Distance: 6.5m Vertically, 7.410m horizontally

2 Stacked Gain: 18.24dBi

2 Stacked Gain 12m up above average ground: 23.27dBi

2 Stacked F/B: 32.65dB

 

Specification

This antenna is made with single piece 1/2 inch 18swg T6 aluminium tube. The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which will support 2 inch (50mm) masts.  Boom is 1.5 inch square 16SWG aluminum which has a 'double boom' center section.  Guys required and supplied along a support truss and stainless steel turnbuckles.

  • Marine grade Stainless Steel Fittings*
  • Original Stauff Insulation clamps
  • Mill finished boom and elements for highest levels of accuracy

 

alt

Azimuth Plot

alt

Elevation Plot

 

alt

1 x 11el LFA at 10m above ground

 

alt

2 x 11el stacked at 6.5m apart 10m above average ground

 

alt

SWR

 

Manufactured the right way, not the cheapest way!

Where possible marine grade stainless steel fittings are used.